Our Email info@aruthventilation.com
HVLS, Exhaust & Cooling, Alwar Rajasthan
Industrial Exhaust Fans in Alwar: HVLS Fans, FRP Exhaust & Air Coolers
We supply and install industrial exhaust fans in Alwar, along with HVLS fans and air coolers, for the steel re-rolling, stainless, FMCG, dairy, automobile and engineering units across the district. Aruth Ventilation Systems is an Ahmedabad manufacturer, and we cover Alwar through our own installation team plus a free on-site survey, not a same-city workshop, so a unit in MIA Alwar or the SNB belt gets an engineer on the floor and a real layout before you spend a rupee. We have completed 230+ installations, our IE5 gearless HVLS fans cut fan power bills by up to 30%, and every fan carries a 2-year warranty.
Alwar has the highest concentration of large industries in Rajasthan, and that shows up the moment you walk a shed here. A steel re-rolling mill in Matsya Industrial Area runs furnaces that push roof temperatures well past anything the outside reading suggests, a Coca-Cola or dairy line needs humidity and odour held in check, and a big engineering shed in the SNB belt has 25,000 sq.ft of open floor with almost no real air movement. The common thread is heat and bad air that ordinary pedestal fans simply cannot shift.
The Rajasthan summer makes it worse. Interior Rajasthan crosses 45 to 48C in May and June, and Alwar sheds, especially tin-roofed steel and engineering units, sit several degrees above the outdoor reading. That is why air movement and proper extraction are not a luxury here, they decide whether your workers can keep working through the afternoon shift and whether your machines run cool.
Here is the honest part: we are based in Ahmedabad, not Alwar. We do not run a workshop in MIA. What we do run is our own installation team that travels to Rajasthan, and every Alwar job starts with a free on-site survey where an experienced engineer stands on your floor, measures roof height, machine heat load and existing openings, and gives you a layout and a number. We then fabricate at our Ahmedabad plant and install at your Alwar unit. You deal with the manufacturer, not a dealer.
We cover the full ventilation stack so one team handles the whole shed: HVLS fans from 2.4 m up to 7.3 m for broad, gentle air movement; industrial and FRP corrosion-proof exhaust fans up to about 44,000 CFM to pull out furnace heat, scale dust, fumes and humidity; and industrial and portable evaporative air coolers, which work especially well in Alwar's dry heat because evaporative cooling needs dry air to do its job.
Our range, in motion
What we supply & install in Alwar
HVLS Industrial Fans
Gearless 2.4 to 7.3 m ceiling fans that move huge volumes of air on 1 to 1.7 kW, even, gentle cooling for high-bay sheds and warehouses.
ExploreIndustrial & FRP Exhaust Fans
Heavy-duty and corrosion-proof FRP exhaust fans up to 44,000 CFM to pull out heat, fumes, dust and humidity.
ExploreIndustrial Air Coolers
Honeycomb-pad evaporative coolers from 7,500 to 30,000 m3/h that cool large sheds and factory floors on low power, much cheaper to run than air conditioning.
ExploreMobile & Portable Fans
Spot-cooling mist and man-cooler fans for workstations, assembly lines and loading bays that need targeted airflow.
ExploreCoverage map
Industrial areas we serve around Alwar
We install across these estates and the units inside them, survey, supply, mounting, wiring and after-sales.
MIA (Matsya Industrial Area), Alwar
RIICO Industrial AreaAlwar's main RIICO estate and the biggest industrial cluster in Rajasthan, packed with steel re-rolling and stainless units, FMCG plants like Coca-Cola, dairy, and heavy engineering. The steel and stainless sheds radiate furnace heat and throw scale dust, so most MIA units need FRP and industrial exhaust to extract heat and dust plus HVLS fans to cool the workers, while the FMCG and dairy lines need exhaust for humidity and odour control.
Which Aruth product solves which Alwar problem
The right fix in Alwar depends entirely on what your shed is fighting, and most units here need a combination. Steel re-rolling and stainless units in MIA have two problems at once, radiant furnace heat and airborne scale dust, so we pair industrial or FRP exhaust fans to physically pull the hot, dusty air out with HVLS fans to keep a steady breeze over the workers who cannot stand near a 7.3 m fan all day in 46C heat.
FMCG and dairy plants, the Coca-Cola line, the milk and packaging units, have a different problem: humidity, condensation and odour. Here exhaust extraction is the priority to keep the air moving out and the smell and moisture controlled, with HVLS fans over packing and warehouse floors for comfort. Big engineering and auto sheds in the SNB belt are mostly about scale: large open floors where one or two HVLS fans replace 15 to 20 pedestal fans and high-CFM exhaust clears welding fumes.
And because Alwar sits in dry interior Rajasthan, evaporative air coolers genuinely work here. Evaporative cooling depends on dry incoming air, and Alwar's summer air is dry, so industrial and portable coolers can drop the temperature meaningfully at workstations and loading bays, where coastal humid cities get far less benefit. We often spec coolers for spot cooling on a line alongside HVLS fans for the whole floor.
Why factories in Alwar choose Aruth
Alwar units choose us because we are the manufacturer and we size honestly. We build HVLS fans, exhaust fans and coolers at our own plant in Ahmedabad, so you get factory pricing, custom sizes and our own engineers handling the survey and after-sales, not a third-party dealer marking up someone else's product. Our IE5 gearless PMSM HVLS motors are the real reason the power bill drops, up to 30% lower than a wall of conventional fans, which matters when an Alwar steel unit runs long summer shifts.
We are also straight about sizing. On the survey we measure your actual roof height, machine heat load and openings, then tell you whether you need fans, exhaust, evaporative cooling, or a mix. If one or two HVLS fans will do the job we will not sell you four. Every fan carries a 2-year warranty and we have 230+ installations behind us, so the recommendation you get is based on floors we have actually stood on, not a template.
Our free site survey and installation across India, including Alwar
Every Alwar job starts with a genuinely free on-site survey, anywhere in the district, with no obligation to buy. We are honest that we are Ahmedabad-based: we do not have a workshop in Alwar, but we install all over India through our own team, including right across Rajasthan, and Alwar is well within our regular route. An experienced engineer comes to your MIA, SNB or standalone unit, measures the floor area, truss height, heat and dust load and existing exhaust openings, and gives you a recommended layout and a written quote.
After the survey we fabricate to your sizes at our Ahmedabad plant and our team handles delivery, mounting, wiring and commissioning at your Alwar site, then stays on for after-sales and warranty support. Because we manufacture in-house, lead times are short and spares are on the shelf, you are not waiting on an importer. To book a survey for your Alwar factory, call +91 88665 44445.
From the field
Verified installCase study: a steel re-rolling unit in MIA Alwar tames furnace heat and scale dust
Before — the problem
A steel re-rolling mill in Matsya Industrial Area came to us with the classic Alwar problem: a 24,000 sq.ft furnace shed where re-rolling heat pushed the floor temperature unbearable by mid-morning, scale dust hung thick in the air near the rolling line, and 46C outside summer heat meant the workers near the furnace were getting almost no relief from their old pedestal fans.
What Aruth installed
We did a free on-site survey, measured a roof height of about 9 m and mapped where the furnace heat was stacking up and where the scale dust was densest. Our recommendation was a combination: three 7.3 m HVLS fans over the open finishing and dispatch floor to keep a steady 1 to 2 m/s breeze on the workers, plus six industrial exhaust fans sized around 40,000-plus CFM total along the furnace-side wall to physically pull the hot, dust-laden air out of the shed instead of letting it settle.
The result
After installation the floor ran several degrees cooler away from the furnace, the scale dust cleared far faster, and because the HVLS fans use IE5 gearless PMSM motors the mill replaced roughly 18 pedestal fans with much lower running cost, dropping fan-related power sharply. The fans carry our 2-year warranty. Our team handled the survey, fabrication in Ahmedabad and the full Alwar installation, so the unit dealt with one accountable manufacturer from start to finish.
Questions
Alwar ventilation FAQs
230+ Companies Trust Our Solutions.
From factories to warehouses, India's top businesses rely on our HVLS fans and industrial air coolers for industrial grade durability and energy savings. Manufactured in our advanced facility, every product meets global ISO standards, Ensuring faster cooling, quieter operation, and 30% lower power costs.
Contact
Ready to improve your industrial ventilation? Get in touch with our experts for customized solutions.
Get Your Custom Quote
Get In Touch
Phone
+91 88665 44445
+91 99787 78767
info@aruthventilation.com
support@aruthventilation.com
Address
GF-001 Mauryansh Elanza, Shyamal Cross Rd,
Nr. Parekh Hospital, Satellite, Ahmedabad 380015
Business Hours
Mon - Fri: 9:00 AM - 6:00 PM
Sat: 9:00 AM - 2:00 PM

Expert Support Team
Our technical experts are ready to help you find the perfect ventilation solution.
Site Visit
Free consultation and assessment






